DDL-8000A Series
Direct-drive, High-speed, 1-needle, Lockstitch Machine with Automatic Thread Trimmer
Description
This sewing machine is provided as standard with the voice guidance with clock function. |
The target number of products, work progress (current number of products produced, achievement rate) and the operating rate of the sewing machine are displayed on the control panel provided that the initial data have been properly set. These pieces of data that provide an indication for the operator will contribute to enhanced production support. |
Since the USB port is provided as standard for the operation panel and control box, sewing data can be managed and the relevant software can be upgraded with ease. |
MODEL | DDL-8000AS-MS | DDL-8000AS-SH | DDL-8000AS-SJ | DDL-8000AB-MS | DDL-8000AB-SH | DDL-8000AB-SJ |
Specification | Standard type | Shorter-thread remaining type | ||||
Application | Medium-weight | Heavy-weight | Jeans·Heavy-weight | Medium-weight | Heavy-weight | Jeans·Heavy-weight |
Lubrication | Semi-dry | Minute-quantity lubrication | Semi-dry | Minute-quantity lubrication | ||
Max. sewing speed | 5,000sti/min*1 | 4,500sti/min*1 | 5,000sti/min*1 | 4,500sti/min*1 | ||
Max. stitch length | 5mm | 5mm (7mm)*2 | 5mm | 5mm (7mm)*2 | ||
Lift of the presser foot | By hand: 5.5mm, Auto: 1st stage 8.5mm, 2nd stage 13mm, By knee: 15mm | |||||
Voice guidance | with voice guide | |||||
Lubricating oil | JUKI Machine Oil 7 (equivalent to ISO VG7) | |||||
Needle | DB×1 (#11) #9~18 (134Nm65~110) |
DB×1 (#21) #20~23 (134Nm125~160) |
DP×5 (#21) #20~23 (134Nm125~160) |
DB×1 (#11) #9~18 (134Nm65~110) |
DB×1 (#21) #20~23 (134Nm125~160) |
DP×5 (#21) #20~23 (134Nm125~160) |
Power consumption | 330VA (Main motor output 550W) | |||||
|
The backlight of the operation panel is automatically turned OFF when the operation panel is not operated for a certain period of time. (Setting time: 1- 20 minutes) |
Illuminance of the LED hand light is adjustable in five levels. It can be adjusted to the illuminance to help the operator to easily carry out work around the needle, thereby helping increase work efficiency. |
The shorter-thread remaining type model is the high-performance sewing machine provided with the thread clamp device which is used at the beginning of sewing and the shorter-thread remaining function which is used at the end of sewing. With these features, manual thread nipping work is no longer required. Double blades drive rotary knife type thread trimmer has been adopted. Since this thread trimmer blades intersect with each other just under the needle entry, an appropriate length of needle thread is ensured without being affected by the stitch length and the length of thread remaining on the material is 3.5 mm or less with consistency. |
Sewing work free from oil stains by means of our leading-edge dry-head technology. With the advanced dry technology of enabling operation without being lubricated, a frame which does not need lubrication has been developed. It is provided with not only a high-speed sewing capability, but also a safety feature for preventing oil stains. |
The machine contributes to production improvement. The DDL-8000A-SH is the standard model developed with the emphasis on durability. It produces seams with consistency when run at speeds which falls in the range of the highest sewing speeds. |
Guage | THROAT PLATE | PRESSER FOOT ASM | FEED DOG | NEEDLE | ||||
Figure | ||||||||
Needle width |
P/N | Remarks | P/N | Remarks | P/N | Remarks | P/N | Remarks |
- | B1109552000 | 4sheets φ1.9_inch_general_China | B15240120BA | Width 1.9 | 40133950 | 4 teeth_pitch1.5_general_ China_Europe |
MDB100B1100 | #11_Organ_Japan |
- | B1109012I0B | 4sheets φ1.6_mm_Europe | - | - | 23614506 | 3 teeth_pitch1.5_Japan | MDB100B1400 | #14_Organ_general_China |
- | 11028008 | 3sheets φ1.9_mm_Japan | - | - | - | - | MC200500750 | Nm75_Shumets_Europe |
Guage | HOOK | NEEDLE BAR | BOBBIN CASE ASM. | BOBBIN | ||||
Figure | ||||||||
Needle width |
P/N | Remarks | P/N | Remarks | P/N | Remarks | P/N | Remarks |
- | 11038650 | Standard_general_ China_Japan |
22886907 | Return 1.8_Shankφ1.64_general_ China_Japan |
11038759 | - | 22932909 | Iron |
- | 11141355 | Standard:C_Europe | 22887004 | Return 1.8_Shankφ2.02_Europe | - | - | - | - |
Guage | PRESSER_SPRING | SLIDE_PLATE | ||
Figure | ||||
Needle width |
P/N | Remarks | P/N | Remarks |
- | 22907406 | - | 22901250 | Iron_crape weave |
Guage | THROAT PLATE | PRESSER FOOT ASM | FEED DOG | NEEDLE | ||||
Figure | ||||||||
Needle width |
P/N | Remarks | P/N | Remarks | P/N | Remarks | P/N | Remarks |
- | 40089605 | 4 sheets φ2.6_noscale_general_ Europe_Japan |
D1524555EBL | Width 2.2_general_ Europe_Japan |
11403003 | 4 teeth_general_ Europe_Japan |
MDB100B2100 | #21_Organ_general_ China_Japan |
- | 11062007 | 3 sheets φ2.6_no scale_China | 40064839 | Widrh 1.9_China | 11062601 | 3 teeth_China | MC200501300 | Nm130_Shumets_Europe |
Guage | HOOK | NEEDLE BAR | BOBBIN CASE ASM. | BOBBIN | ||||
Figure | ||||||||
Needle width |
P/N | Remarks | P/N | Remarks | P/N | Remarks | P/N | Remarks |
- | 11092251 | Thick | 40061767 | Return 2.3_Shankφ2.04 | 40000264 | - | 22932909 | Iron |
Guage | PRESSER_SPRING | SLIDE_PLATE | ||
Figure | ||||
Needle width |
P/N | Remarks | P/N | Remarks |
- | B1505552000A | - | 22901250 | Iron_crape weave |
Guage | THROAT PLATE | PRESSER FOOT ASM | FEED DOG | NEEDLE | ||||
Figure | ||||||||
Needle width |
P/N | Remarks | P/N | Remarks | P/N | Remarks | P/N | Remarks |
- | 40089605 | 4 sheets φ2.6_no scale_ general_Europe_Japan |
D1524555EBL | Width 2.2_general_ Europe_Japan |
11403003 | 4 teeth_general_ Europe_Japan |
MC200501300 | Nm130_Shumets_Europe |
- | 11062007 | 3 sheets φ2.6_no scale_China | 40064839 | Widrh 1.9_China | 11062601 | 3 teeth_China | MDP500B2100 | #21Organ_general_ China_Japan |
Guage | HOOK | NEEDLE BAR | BOBBIN CASE ASM. | BOBBIN | ||||
Figure | ||||||||
Needle width |
P/N | Remarks | P/N | Remarks | P/N | Remarks | P/N | Remarks |
- | 40035058 | For jeans | 40061767 | Return 2.3_Shankφ2.04 | 40000264 | - | 22932909 | Iron |
Guage | PRESSER_SPRING | SLIDE_PLATE | ||
Figure | ||||
Needle width |
P/N | Remarks | P/N | Remarks |
- | B1505552000A | - | 22901250 | Iron_crape weave |