MH-486-5 (with automatic thread trimmer)
1-needle, Double Chainstitch, Bottom and Variable Top-feed Machine
Description
The machine comes with many different functions to prevent uneven material feed and puckering for higher-quality seams. The machine is adaptable to a wider variety of light-to heavy-weight materials and takes full advantage of top-feed mechanism. This enables unskilled operators to finish seams of consistent quality. |
The machine comes with a forced lifting mechanism for the top-feed dog. This enables the operator to place the material to be sewn on the top-feed dog more smoothly. The machine incorporates its exclusive chain-off thread presser pedal foot, which improves seam quality and ease of operation. The exclusive gauge comes in five different types, and the gauges can be replaced in a simple procedure. This facilitates the required adjustment when changing the needle count. |
The machine works effectively for processes which require partial shirring as long as the partial shirring device (PH-3) is used in combination with the partial shirring dial.
The partial shirring device comes in two different types, the kneepad drive type and the pedal drive type. |
Model name | MH-486-5 |
Feed system | Bottom and variable top-feed |
Max. sewing speed | 4,500rpm |
Stitch length | 1~5mm |
Top-feed amount | 0~7mm |
Differential-feed ratio | - |
Lift of the presser foot | By hand: 5mm, By knee: 7mm |
Needle bar stroke | 33mm |
Needle (at the time of the delivery) | TV × 7 (#11) #9~#21 |
Stitch length adjustment | By dial |
Safety stitch | Condensation stitch/reverse stitching (by feed lever) |
Looper system | Inclined crank |
Looper stroke | 21.5mm |
Looper stroke of the front and rear | 3.2mm |
Speed control | *(1) |
Lubrication | Automatic |
Lubricating oil | JUKI New Defrix Oil No.1 (equivalent to ISO VG7) |
Motor output | 750W |
Power requirement | Single-phase, 3-phase |
Power consumption | Rating 425VA |
|
Model name | MH-486-5 | Remarks |
Condensation stitch | Provide | Use the reverse stitching lever Adjust the stopper |
Reverse stitch | Provide | |
Thread clamp device | Provide | |
Needle thread releasing device | Provide | |
Needle thread drow-out mechanism | Provide | |
Thread spreader | Provide | |
Movable needle guard | Provide | |
Sliding presser | - | |
Chain-off thread presser | Provide | Chain-off thread presser foot for the MH-480 series |
Silicon oil lubricating unit | Provide | Provided as standard (packed together with accessories) |
The machine comes with a thread spreading mechanism and an adjustable needle guard to prevent stitch skipping. The thread clamp mechanism, tension release mechanism and needle thread draw-out mechanism enable the machine to leave thread of a uniform length after thread trimming, and prevent slip-off of the needle thread. All of these mechanisms contribute to upgraded sewing. |
Safety stitching (condensation stitching) the perfect method of preventing loose stitches, or reverse feed stitching (back-tacking) can be alternated through the simple adjustment of the stopper of the reverse feed lever. Either sewing method can be used. |
Provided with a sliding presser foot and a silicone oil lubricating unit as standard, stitch skipping and puckering are prevented. Furthermore, the silicone oil lubricating unit prevents the needle from overheating, and allows foundation yarn or synthetic thread to be used without breakage during sewing. These features assure beautifully finished seams with consistency for light- to medium-weight materials. |
Guage | THROAT PLATE | FEED DOG | UPPER FEED PRESSER | PRESSER FOOT |
Figure | ||||
Specification | P/N | P/N | P/N | P/N |
Standard general runstitch (rake-in type) |
B1103481F00 | B1613481F00 | B3026487000 | B15244860B0 |
B: For medium turning stitch, gathering stitch (rake-in type: for preventing uneven material feed) |
B1103481F00 | B1613481F00 | B3026487000 | B1524486BA0 |
S For sharp turning stitch (rake-in type: for preventing puckering) |
B1103481F00 | B1613481F00 | B3026487S00 | B1524486SB0 |