Efficiency of feed and sewing capabilities for supporting sewing performance at a higher speed of 3,500sti/min |
One of two different stitch lengths can be selected according to the application. The stitch length can be instantaneously changed over by pressing the stitch selector switch mounted on the lower part of the machine arm. |
Thread nipping work required at the beginning and end of sewing is reduced. This is a high-performance machine which contributes to both increased productivity and improved quality for sewing car seats. Frequency of the use of scissors by the operator is reduced, thereby helping prevent the material from being damaged. |
Model name | LU-2210N-7 LU-2210W-7 |
LU-2212N-7 | LU-2220N-7 | LU-2260N-7 LU-2260W-7 |
1-needle | 1-needle / 2-pitch dial type | 1-needle / 2-pitch dial / Shorter thread remaining type |
2-needle | |
Max. sewing speed | 3,500sti/min* | |||
Max. stitch length | 9mm (forward/backward) | 6mm (forward/backward) | ||
Needle bar stroke | 33.8mm | |||
Max. lift of the presser foot | Auto: 16mm, By hand: 9mm | |||
Alternating vertical movement | 1mm~6.5mm (by dial) | |||
Thread take-up | Link type | |||
Hook | N: Vertical-axis 1.6 fold-capacity hook W: Vertical-axis double-capacity hook |
N: Vertical-axis 1.6 fold-capacity hook | N: Vertical-axis 1.6 fold-capacity hook W: Vertical-axis double-capacity hook |
|
Needle | 134×35R (Nm140) Nm110~Nm160 | |||
Thread | #30~#4, B46~B138, Nm60/3~20/3 | #20~#5, B64~B138, Nm40/3~20/3 | ||
Distance from needle to machine arm | 263.5mm | |||
Lubrication | Automatic | |||
Bobbin thread winder | Built on the machine head | |||
Safety mechanism | Provided as standard | |||
Automatic reverse feed function | Provided as standard | |||
Auto-lifter | Provided as standard (pneumatic auto-lifter) | |||
Compressed air | 0.5MPa | |||
Air consumption | 0.763dm³/min (ANR) | 1.078dm³/min (ANR) | 1.337dm³/min (ANR) | 0.736dm³/min (ANR) |
Weight of the machine head | 55kg | 58kg | ||
Power requirement | Single-phase 100~120V, 200~240V 3-phase 200~240V |
|||
Power consumption | 425VA | |||
|
|
|
With the adoption of this verertical-axis 1.6 fold-capacity hook, the frequency of bobbin thread winding is reduced, promising sewing work of increased efficiency. |
|
Guage | GUAGE SET | NEEDLE CLAMP ASM. | NEEDLE ROD THREAD RACK | FEED DOG | PRESSER FOOT ASM. | FINGER GUARD |
Figure | - | |||||
Needle width | P/N | P/N | P/N | P/N | P/N | P/N |
(4) | 10784551 | - | 10779007 | 10780005 | 10781557 | 10786903 |
6 | 10784650 | 10777654 | 10780104 | 10781656 | ||
8 | 10784759 | 10777753 | 10780203 | 10781755 | ||
10 | 10784858 | 10777852 | 10779106 | 10780302 | 10781854 | 10787000 |
12 | 10784957 | 10777951 | 10780401 | 10781953 | ||
(14) | 10785053 | 10778058 | 10780500 | 10782050 | 10787109 | |
(16) | 10785152 | 10778157 | 10780609 | 10782159 | ||
(18) | 10785251 | 10778256 | 10780708 | 10782258 | ||
20 | 10785350 | 10778355 | B1403526000 | 10780807 | 10782357 | 10787208 |
(22) | 10785459 | 10778454 | 10780906 | 10782456 | ||
(24) | 10785558 | 10778553 | 10781003 | 10782555 | ||
(30) | 10785657 | 10778652 | 10781102 | 10782654 | 10787307 | |
(36) | 10785756 | 10778751 | 10781201 | 10782753 | 10787406 | |
Remarks | Sets having () with needle width are specially made to order. Slide plate_left and slide plate_right are not included int the set. |
Guage | WOLKING FOOT ASM. | THROAT PLATE | SLIDE PLATE_LEFT | SLIDE PLATE_RIGHT |
Figure | ||||
Needle guage size | P/N | P/N | P/N | P/N |
(4) | 10783058 | 10784502 | 10786309 | 10701803 |
6 | 10783157 | 10784601 | ||
8 | 10783256 | 10784700 | ||
10 | 10783355 | 10784809 | 10786408 | 10786002 |
12 | 10783454 | 10784908 | ||
(14) | 10783553 | 10785004 | ||
(16) | 10783652 | 10785103 | ||
(18) | 10783751 | 10785202 | ||
20 | 10783850 | 10785301 | 10786507 | 10786101 |
(22) | 10783959 | 10785400 | ||
(24) | 10784056 | 10785509 | ||
(30) | 10784155 | 10785608 | ||
(36) | 10784254 | 10785707 | 10786606 | 10786200 |
Remarks | Slide plate_left and slide plate_right are not included int the set. |
Guage | PRESSER FOOT ASM. | WALKING FOOT ASM. | *1 WALKING FOOT ASM_WITHOUT GROOVE | ||||
P/N | Figure | P/N | Figure | P/N | Figure | ||
Standard | 10712552 | 10711653 | 10712354 | ||||
*2 For overlapped sections of material. | 10758456 | ||||||
*3 For overlapped sections of material. | 10712651 | ||||||
*4 For light weight sponge. | 10712750 | - | - | ||||
*5 For heavy weight sponge. | 10711752 | - | - | ||||
Right edge presser | - | - | 10711851 | - | - | ||
Left edge presser | - | - | 10711950 | - | - | ||
For piping | 3mm | - | - | 10745354 | - | - | |
4mm | - | - | 10745453 | - | - | ||
5mm | - | - | 10745552 | - | - | ||
6mm | - | - | 10745651 | - | - | ||
For piping, adjustment type | 3mm | - | - | 10746352 | - | - | |
4mm | - | - | 10746451 | - | - | ||
5mm | - | - | 10746550 | - | - | ||
6mm | - | - | 10746659 | - | - | ||
Wide type | - | - | 10712057 | - | - |
*1 To be used when the thread cannot be grasped at the sewing start.
*2 Common type for overlapped sections and flat sections, intermediate type between 10712552 and 10712651.
*3 To be used when overlapped sections cannnot be smoothly fed.
*4 To be used for resilient materials such as sponge.
*5 To be used for further resilient materials.
Guage | PRESSER FOOT ASM. | WALKING FOOT ASM. | |||
P/N | Figure | P/N | Figure | ||
- | - | - | 10711653 | ||
For urethane | - | - | 10711752 | ||
*2 Right edge presser | 10712859 | 10711851 | |||
*3 Left edge presser | 10712958 | 10711950 | |||
*4 For piping | 3mm | 10747350 | 10745354 | ||
4mm | 10747459 | 10745453 | |||
5mm | 10747558 | 10745552 | |||
6mm | 10747657 | 10745651 | |||
*5 For piping, adjustment type | 3mm | - | - | 10746352 | |
4mm | - | - | 10746451 | ||
5mm | - | - | 10746550 | ||
6mm | - | - | 10746659 | ||
*1 Without groove | - | - | 10712354 | ||
*6 Wide type | 10713055 | 10712057 |
*1 To be used when the thread cannot be grasped at the sewing start.
*2 To be used to sew edges of material.
*3 To be used to sew edges of material.
*4 To be used for general piping processes.
*5 Permits adjustment of needle position with respect to the pipe.
*6 To be used when a sewing product cannot be smoothly fed.
Guage | FEED DOG | THROAT PLATE | |
Figure | |||
- | Model | P/N | P/N |
Standard | LU-2210N-7 LU-2210W-7 LU-2212N-7 |
10717106 | 10701704 |
Without groove | 10717205 | - | |
For fine thread | 10717304 | - | |
Wide type | 10739001 | 10702009 | |
Standard | LU-2220N-7 | 40083237 | 40058071 |
OP | 40058070 | - | |
40062827 | |||
40064353 | |||
40081022 |
Guage | FEED FOOT ASM. | PRESSER FOOT ASM. | |
Figure | |||
For machining | P/N | 10712255 | 10748358 |
Guage | SWING WDGE GUIDE | NEEDLE BAR THREAD GUIDE | ||
Figure | ||||
Model | P/N | P/N | ||
LU-2220N-7 | MAH152010A0 | 10735868 |