LBH-1796AN(220mm壓腳規格)
高速電子鎖眼縫製系統
產品說明
LBH-1796AN是LBH-1790AN系列的子類機型。配置220mm的壓布壓腳。秉承了現有機型LBH-1790AN的世界最高縫製速度、深形機頭和乾機頭規格。LBH-1796AN也可用作一行縫製三個紐孔的簡易自動送布裝置。 |
LBH-1796AN安裝了選購件自動送布機構後,一名操作人員可同時操作2台該型號的縫紉機,或者可以與LK-1903BN釘扣機搭配使用,從而進一步提高生產效率,確保穩定的縫製質量,而且無需操作人員具備特殊技能。 |
可通過應用軟件管理、瀏覽和編輯數據 根據縫製產品調整縫紉機數據,以無接觸方式將數據傳輸到市場上銷售的安卓系統平板電腦。這樣便可以快速檢查統一設定,確認縫製流水線的縫紉機狀況,更改設定更方便。操作面板還標配了USB接口。可通過U盤輕鬆進行數據管理和軟件更新。 縫製數據進行數字化管理,以確保“穩定的質量”並“縮短設定更改時間”。 可以使用安卓系統平板電腦或U盤從縫紉機中導出量化縫製數據。 * 推薦在Android OS 6.0版本上使用JUKI Smart應用程序。 (已確認5.0及以上版本可運行操作。) 有關如何使用應用軟件的信息,請與您所在地區的JUKI分銷商聯繫。 |
產品型號 | LBH-1796AN |
縫製速度 | 最大4,200sti/min* ,正常3,600sti/min*,使用無供油旋梭(選購件)時:3,300sti/min* |
針桿行程 | 34.6mm |
切布刀尺寸 | 6.4~25.4mm |
套結寬度 | 最大5.0mm |
紐孔長度 | 最大220mm |
擺針機構精度 | 0.05mm |
面線夾線器 | 電子夾線器(電子面線張力控制系統) |
針數 | 根據紐孔和針距的尺寸自動計算 |
機針(出廠時) | DP×5 (#11J) #11J~#14J |
旋梭 | DP型,全迴轉旋梭,無供油(選購件) |
壓布壓腳提升量 | 平行提升6mm |
自動提升裝置 | 標配(步進馬達式) |
擺針裝置 | 步進馬達 |
送布系統 | 步進馬達間隔送布 |
切布刀系統 | 步進馬達 |
標準圖案數 | 31種圖案 |
輸入圖案數 | 最多99種圖案 |
卷底線裝置 | 內置機頭 |
機頭驅動系統 | 小型交流伺服馬達(直驅系統) |
電源要求/耗電量 | 三相200~240V/250VA |
供油方式 | 僅旋梭部分需要微量供油。 * 使用無供油旋梭(選購件)時無需供油。 |
供油 | 旋梭:JUKI新型1號Defrix Oil(等同於ISO VG7) |
重量 | 機頭(包括馬達)55kg,電子控制箱6kg |
|
最高縫製速度為4,200sti/min,空送速度為200mm/s。連續縫製的循環時間進一步縮短。 |
循環縫製 可以記錄20個不同的程序,每個程序最多可存儲30個不同的花樣。 連續縫製 可以在不提升壓布壓腳的情況下連續縫製兩種或多種不同的花樣。可以記錄20個不同的程序,每個程序最多可存儲6個不同的花樣。(需要將相關配件更換為選購件。) |
|
|
|
|
粗縫是針織等彈性面料的有效縫製方法。粗縫:面線被準確捲入,因而不會從紐孔中伸出而造成鬆線。粗縫可以縫製9圈。 |
|
|
|
最多存儲99種不同的花樣,可以根據需要通過操作面板進行選擇。 |
Guage | CLOTH CUTTING KNIFE_STANDARD | CLOTH CUTTING KNIFE_FLAT KNIFE | KNIFE GUARD | THROAT PLATE | ||||
Figure | ||||||||
Knife size | Mark | P/N | Remarks | P/N | P/N | P/N | ||
A | B | C | ||||||
inch | mm | - | ||||||
1/4 | 6.4 | F | B2702047F00 | - | B2745771F00 | B2746771000 | 13782800 | |
3/8 | 9.5 | K | B2702047K00A | B2745771K00 | ||||
7/16 | 11.1 | I | B2702047I00 | - | ||||
1/2 | 12.7 | L | B2702047L00A | Knife at shipping for other than LBH-1796A and 1796AN. | B2745771L00 | |||
9/16 | 14.3 | V | B2702047V00 | B2745771H00 | ||||
5/8 | 15.9 | M | B2702047M00A | B2745771M00 | ||||
11/16 | 17.5 | A | B2702047A00 | - | ||||
3/4 | 19.1 | N | B2702047N00 | B2745771N00 | ||||
7/8 | 22.2 | P | B2702047P00 | B2745771P00 | ||||
1 | 25.4 | Q | B2702047Q00A | B2745771Q00 | ||||
1-1/8 | 28.6 | R | - | - | B2745771R00 | |||
1-1/4 | 31.8 | S | B2702047S00A | LBH-1790AB, 1790ANB/ 1796A, and 1796AN are not supported. | B2745771S00 |
Maximum knife size per machine type | |||
Model | Limitation by throat plate | Limitation by presser | Maximum knife size |
LBH-1796A LBH-1796AN |
25.4mm | 31.8mm | 25.4mm |
Guage | THROAT PLATE | FEED PLATE | Spacer | ||||
S(Standard) | K(Knitwear) | S(Standard) | |||||
Figure | |||||||
Model | Sewing area (Horizontal/ vertical) |
U014 division |
Presser arm (area supported) |
Shape[2] A×B×C×D |
Shape[2] supported |
||
LBH-1796A LBH-1796AN |
4×220 | Type 5 | ST | 40156792 (1.4 X 5.8 X 2.3 X 8.3) |
40156791 | Necessary for the throat plate base unit. 40011319(X2), 40004326(X1), WP0551016SH(X2) |
*1 This is an optional guage that prevents cloth displacement that can oocur at a stepped part. A presser to be used is B1552781000A/B1552782000.
*2 The width of the convex part of the needle plate is wider than any convex part of needle plates with other specifications. If this is used with a feed plate with other specifications together, the feed plate may interfere with this.
Guage | PRESSER | Presser foot | |||||
Figure | |||||||
Model | Sewing area (Horizontal/ vertical) |
U014 division |
Presser arm (area supported) |
Shape A×B |
S(Standard) | Springs are available | Single item |
LBH-1796A LBH-1796AN |
4×220 | Type 5 | ST | 227 X 5.6 | 40164518 | - | 40152587 |
*3 This is a component part (optional) for *1.
Supplement | Maximum sewing are | Frame |
LBH-1796A LBH-1796AN |
5mm×220mm | Dedicated frame |
*4 For LBH-1790S/1790A/1790AN/1790AB/1790ANB/1795A/1795AN, the change of specification can be made only by changing the parts since those machines uses the same frame.
Caution | Figure | |||||
When replacing the throar plate between LBH-1790A* and LBH-1790A*B, changing the machine type setting in the memory is required since the distance between the needle entry and knife different than the standard type. [Size of needle entry knife groove] LBH-1790A*B, LBH-1796A*: 1mm LBH1790A*, LBH-1795A*, LBH-1790S: 2mm |
||||||
LBH-1790S, 1796A and 1796AN use the special frame, which if not compatible with LBH-1790S, 1790A, 1790AN, 1790AB, 1790ANB, 1795A and 1795AN. therefore, the presser type 1 to 3 cannot be assembled. | - | |||||
There is a difference of timing gage in LBH-1790S, 1790A and 1790AN; LBH-1790AB and 1790AMB. Since the thickness of the throat plate is different, the length of the timing gage differs. The hook timing does not change since the total length is the same. |
- | |||||
When the feed width is more than 5mm with LBH-1790S, 1790A, the presser arm and oil shield need to be replaced. (For details, refer to the parts book, specia specifications 2.) |
- | |||||
When the feed direction is more than 41mm with LBH-1790S, 1790A, the presser arm needs to be replaced. (For details, refer to the parts book, special specifications 2.) |
- |
Guage | HOOK | |||||||
Figure | ||||||||
Model | Sewing area (Horizontal/ vertical) |
U014 division |
S(Standard) | K(Knitwear) | Non lubrication hook | |||
P/N | Name of part | Qty | Remarks | |||||
LBH-1796A LBH-1796AN |
4×220 | Type 5 | 13729066 | - | [1]40006345 [2]40006349 [3]13729660 [4]SS8660612TP |
[1]RP hook asm. [2]RP bobbin case [3]Hook sleeve asm. [4]Setscrew |
[1]1 [2]1 [3]1 [4]4 |
Complete fry head machine is produced by installing non lubrication hook. (Max. sewing speed reaches 3,300 st/min.) |
Guage | Electric bobbin winder | |||||
P/N | Name of part | Qty | Remarks | |||
G50011980A0A | Electric bobbin winder asm. | 1 | Device that can wind bobbin thread independently. | |||
40005405 | Bobbin winder powe cord asm. | 1 | ||||
40053150 | Bobbin winder thread tension asm. | 1 | ||||
SK3452000SC | Wood screw | 4 |
Guage | 2 pedal for standing work (PK) | 2 pedal | |||||
P/N | Name of part | Qty | P/N | Name of part | Qty | ||
GPK510010B0 | 2 pedal for standing work asm. | 1 | 40003491 | 4 position pedal sensor | 1 | ||
GPK570010B0 | 1 pedal for standing work asm. | 1 | 26104851 | Connecting rod | 1 | ||
40003493 | PK pedal joint cord asm. | 1 |
Guage | Points of replacement for feed 70mm and 120 mm | |||||
No. | P/N | Name of part | Qty | Remarks | ||
[1] | 40006335 | Presser arm 120 | 1 | Common to 70 mm and 120 mm | ||
[2] | 40006340 | Presser arm spacer | 1 | Not necessary when using 120 mm presser | ||
[3] | SM6040450TP | Setscrew | 3 | Not necessary when using 120 mm presser | ||
[4] | 40008646 | Presser foot 120 (asm.) | 1 | For feed 120 mm | ||
[5] | 40008658 | Presser foot 120 | 1 | For feed 120 mm | ||
[6] | 14523252 | Presser foot 70 (asm.) | 1 | For feed 70 mm | ||
[7] | 14523401 | Presser 70 | 1 | For feed 70 mm (for knits) | ||
[8] | 14523708 | Urethane presser 70 | 1 | * Optional for feed 70 mm (for cloth) | ||
[9] | 14524102 | Flat presser 70 | 1 | * Optional for feed 70 mm (for heavy-weight cushion stuff) | ||
[10] | SS6060210SP | Setscrew | 2 | Common to 70 mm and 120 mm | ||
[11] | SD0790203SP | Hinge screw | - | Incorporated in machine head | ||
[12] | 40028682 | Close cam 120 | 1 | Common to 70 mm and 120 mm | ||
[13] | 40112711 | Lifting plate 120 | 1 | Common to 70 mm and 120 mm | ||
[14] | SM6050800SP | Setscrew | 2 | Common to 70 mm and 120 mm | ||
[15] | 40004203 | Feed base (asm.) | - | Incorporated in machine head | ||
[16] | SM8050502TP | Setscrew | - | Incorporated in machine head | ||
[17] | 40004288 | Presser arm shaft | - | Incorporated in machine head | ||
[18] | 40006339 | Cloth feed plate 120 | 1 | Common to 70 mm and 120 mm | ||
[19] | SM6040602TP | Setscrew | - | Incorporated in machine head | ||
Figure |