機臂到機針中心的距離長達650mm,最適合嵌條縫的加固縫工序,以及大型面料明線縫等的中間縫製工序。 |
LU-2216N-7(單針)和LU-2266N-7(雙針)的最高縫製速度均為3,000rpm。確保了縫製長面料時的高生產率。 |
採用全自動供油,省卻了手動加油的繁瑣作業。 機油通過柱塞泵強制循環流經機器面板。從而防止面板漏油。 |
壓腳可提升至16mm。足夠的提升量確保機器的厚料設置簡便,操作舒適。 |
通過機頭頂部的大撥盤,可以簡便地更改同步壓腳和壓腳的上下行程(交替上下移動量)。縫製速度可根據上下行程設定進行自動調節。始終保持理想的縫紉條件。 |
厚料或難以送布的高低段部等的縫製工序中,按下DL開關可瞬間切換同步壓腳和壓腳的上下行程。 實現精美不起褶的縫製質量。 |
通過運動切刀軸的固定移動和切刀的最佳移動量,切線裝置可以精準剪切粗線。此外,即使換了線號,也無需調整。 |
產品型號 | LU-2216N-7 | LU-2266N-7 | ||||
(單針) | (雙針) | |||||
最大縫製速度 | 3,000sti/min* | |||||
最大針距長度 | 9mm(正常/倒縫) | 6mm(正常/倒縫) | ||||
針桿行程 | 36mm | |||||
針幅 | - | 10mm(標準) | ||||
壓腳提升量 | 手動:9mm,自動:16mm | |||||
自動提升裝置 | 標準配置(氣動式自動提升裝置:AK142) | |||||
挑線桿 | 連桿式 | |||||
交替上下移動 | 1mm~6.5mm | |||||
DL裝置 | 標準配置 | |||||
旋梭 | 垂直軸1.6倍容量旋梭 | |||||
機針(出廠時) | 134×35(Nm140)Nm100~Nm180 | 134×35(Nm140)Nm100~Nm160 | ||||
線 | #30~#4,B46~B138,Nm=60/3~20/3 | #20~#5,B69~B138,Nm=40/3~20/3 | ||||
安全裝置 | 標準配置 | |||||
供油方式 | 自動 | |||||
供油 | JUKI新型1號Defrix Oil(等同於ISO VG7) | |||||
從機針到機臂的距離 | 650mm | |||||
機台尺寸 | 917mm×178mm | |||||
機頭重量 | 90kg | 95kg | ||||
自動倒縫功能 | 標準配置 | |||||
氣壓和耗氣量 | 0.5MPa (5kgf/cm²),0.3Nl/min. | |||||
電源要求 | 單相110~120V,220~240V,三相200~220V,220~240V | |||||
|
LU-2210N/-2260N系列使用的針位(旋梭、梭芯、同步壓腳、壓腳和送布)也可用於此機型。LU-2210N/-2260N中的所有零件也可用於LU-2216N/-2266N。此外,切刀和麵線夾線器的組件相同。 |
具有強大的送布能力和最佳的傳送軌跡,即使以更高的縫製速度運行,也能順暢地送布而不會產生起褶現象。 |
Guage: Standard | THROAT PLATE | THROAT PLATE | FEED FOOT ASM. | PRESSER FOOT ASM. | FEED DOG |
Figure | |||||
P/N | 10701704 | 10702009 | 10711653 | 10712552 | 10717106 |
Remarks | - | Wid type | - | - | - |
Guage: Standard | SLIDE PLATE ASM. | SLIDE PLATE_LEFT | SLIDE PLATE_RIGHT | SLIDE PLATE_RIGHT |
Figure | ||||
P/N | 10701654 | 10701902 | 10701803 | 10753150 |
Remarks | - | Thread trimmer | Thread trimmer | needle thread breakage, with a window |
Guage | PRESSER FOOT ASM. | WALKING FOOT ASM. | *1 WALKING FOOT ASM._WITHOUT GROOVE | ||||
P/N | Figure | P/N | Figure | P/N | Figure | ||
Standard | 10712552 | 10711653 | 10712354 | ||||
*2 For overlapped sections of material. | 10758456 | ||||||
*3 For overlapped sections of material. | 10712651 | ||||||
*4 For light weight sponge. | 10712750 | - | - | ||||
*5 For heavy weight sponge. | 10711752 | - | - | ||||
Right edge presser | - | - | 10711851 | - | - | ||
Left edge presser | - | - | 10711950 | - | - | ||
For piping | 3mm | - | - | 10745354 | - | - | |
4mm | - | - | 10745453 | - | - | ||
5mm | - | - | 10745552 | - | - | ||
6mm | - | - | 10745651 | - | - | ||
For piping, adjustment type | 3mm | - | - | 10746352 | - | - | |
4mm | - | - | 10746451 | - | - | ||
5mm | - | - | 10746550 | - | - | ||
6mm | - | - | 10746659 | - | - | ||
Wide type | - | - | 10712057 | - | - |
*1 To be used when the thread cannot be grasped at the sewing start.
*2 Common type for overlapped sections and flat sections, intermediate type between 10712552 and 10712651.
*3 To be used when overlapped sections cannnot be smoothly fed.
*4 To be used for resilient materials such as sponge.
*5 To be used for further resilient materials.
Guage | PRESSER FOOT ASM. | WALKING FOOT ASM. | |||
P/N | Figure | P/N | Figure | ||
- | - | - | 10711653 | ||
For urethane | - | - | 10711752 | ||
*2 Right edge presser | 10712859 | 10711851 | |||
*3 Left edge presser | 10712958 | 10711950 | |||
*4 For piping | 3mm | 10747350 | 10745354 | ||
4mm | 10747459 | 10745453 | |||
5mm | 10747558 | 10745552 | |||
6mm | 10747657 | 10745651 | |||
*5 For piping, adjustment type | 3mm | - | - | 10746352 | |
4mm | - | - | 10746451 | ||
5mm | - | - | 10746550 | ||
6mm | - | - | 10746659 | ||
*1 Without groove | - | - | 10712354 | ||
*6 Wide type | 10713055 | 10712057 |
*1 To be used when the thread cannot be grasped at the sewing start.
*2 To be used to sew edges of material.
*3 To be used to sew edges of material.
*4 To be used for general piping processes.
*5 Permits adjustment of needle position with respect to the pipe.
*6 To be used when a sewing product cannot be smoothly fed.
Guage | FEED DOG | THROAT PLATE | |
Figure | |||
- | P/N | P/N | |
Standard | 10717106 | 10701704 | |
Without groove | 10717205 | - | |
For fine thread | 10717304 | - | |
Wide type | 10739001 | 10702009 |
Guage: For machining | FEED DOG | PRESSER FOOT | |
Figure | |||
P/N | 10712255 | 10748358 |
Guage | SWING WDGE GUIDE | |
Figure | ||
P/N | MAH152010A0 |
Guage: Standard | THROAT PLATE | WALKING FOOT ASM. | PRESSER FOOT ASM. | FEED DOG | NEEDLE BAR THREAD GUIDE |
Figure | |||||
P/N | 10784809 | 10783355 | 10781854 | 10780302 | 10779007 |
Remarks | 10mm | 10mm | 10mm | 10mm | 4-8mm |
Guage: Standard | SLIDE PLATE ASM. | SLIDE PLATE_LEFT | SLIDE PLATE_RIGHT | NEEDLE CLAMP ASM. | NEEDLE CLAMP |
Figure | |||||
P/N | 10701654 | 10786408 | 10786002 | 10777852 | 10777803 |
Remarks | - | 10-18mm | 10-18mm | 10mm | 10mm |
Guage | GUAGE SET | NEEDLE CLAMP ASM. | NEEDLE BAR THREAD GUIDE | FEED DOG | PRESSER FOOT ASM. | FINGER GUARD |
Figure | - | |||||
Throat width | P/N | P/N | P/N | P/N | P/N | P/N |
(4) | 10784551 | 10777555 | 10779007 | 10780005 | 10781557 | 10786903 |
6 | 10784650 | 10777654 | 10780104 | 10781656 | ||
8 | 10784759 | 10777753 | 10780203 | 10781755 | ||
10 | 10784858 | 10777852 | 10779106 | 10780302 | 10781854 | 10787000 |
12 | 10784957 | 10777951 | 10780401 | 10781953 | ||
(14) | 10785053 | 10778058 | 10780500 | 10782050 | 10787109 | |
(16) | 10785152 | 10778157 | 10780609 | 10782159 | ||
(18) | 10785251 | 10778256 | 10780708 | 10782258 | ||
20 | 10785350 | 10778355 | B1403526000 | 10780807 | 10782357 | 10787208 |
(22) | 10785459 | 10778454 | 10780906 | 10782456 | ||
(24) | 10785558 | 10778553 | 10781003 | 10782555 | ||
(30) | 10785657 | 10778652 | 10781102 | 10782654 | 10787307 | |
(36) | 10785756 | 10778751 | 10781201 | 10782753 | 10787406 | |
Remarks | Sets having () with needle width are specially made to order. Slide plate_left and slide plate_right are not included int the set. |
Guage | WALKING FOOT ASM. | THROAT PLATE | SLIDE PLATE_LEFT | SLIDE PLATE_RIGHT |
Figure | ||||
Throat width | P/N | P/N | P/N | P/N |
(4) | 10783058 | 10784502 | 10786309 | 10701803 |
6 | 10783157 | 10784601 | ||
8 | 10783256 | 10784700 | ||
10 | 10783355 | 10784809 | 10786408 | 10786002 |
12 | 10783454 | 10784908 | ||
(14) | 10783553 | 10785004 | ||
(16) | 10783652 | 10785103 | ||
(18) | 10783751 | 10785202 | ||
20 | 10783850 | 10785301 | 10786507 | 10786101 |
(22) | 10783959 | 10785400 | ||
(24) | 10784056 | 10785509 | ||
(30) | 10784155 | 10785608 | ||
(36) | 10784254 | 10785707 | 10786606 | 10786200 |
Remarks | Slide plate_left and slide plate_right are not included int the set. |