DDL-5550N-7(帶自動切線裝置)
DDL-5550N
單針平縫機
產品說明
配備切線機構,切線快速可靠,實現高效縫製作業。 |
壓腳提升量加大,更易於放置或取出布料,或縫製重疊部位。 |
新型電子控制箱SC-920C是最新開發產品。能抗電壓波動、噪音和振動。
首次在縫紉機控制箱中配備節能模式。 馬達不轉時,待機時間的耗電量降低了約25%(相比於SC-910N)。 此外,DDL-5550N-7採用最新節能技術,配置最新小型伺服馬達M92,節能又環保,同時提高了生產效率。 |
兩種不同的操作面板CP-18A和CP-180A適用於DDL-5550N-7。兩個操作面板均具有生產支持功能。 生產支持功能實際上由三種不同的功能組成(六種不同模式)。 |
MODEL | DDL-5550N-7 | DDL-5550NA-7 | DDL-5550NH-7 |
用途 | 中厚料 | 薄料 | 厚料 |
最大縫製速度 | 5,000sti/min* | 4,000sti/min* | |
最大針距長度 | 4mm | 5mm | |
針桿行程 | 30.7mm | 35mm | |
壓腳提升量 | 手動:5.5mm 膝動:13mm |
手動:4mm 膝動:9mm |
手動:5.5mm 膝動:13mm |
機針 (出廠時) |
DB×1(#14) 適用於JE:134 (Nm75) |
DA×1(#9) 適用於JE:134 (Nm65) |
DB×1(#21) 適用於JE:134 (Nm130) |
旋梭 | 自動供油全迴轉旋梭 | ||
供油方式 | 自動 | ||
供油 | JUKI新型1號Defrix Oil(等同於ISO VG7) | ||
自動倒縫功能 | 標準配置 | ||
電源要求 | 單相100~120V、200~240V,三相200~240V | ||
耗電量 | 650VA | ||
總重 | 81kg | ||
|
MODEL | DDL-5550N | DDL-5550NA | DDL-5550NH |
用途 | 中厚料 | 薄料 | 厚料 |
最大縫製速度 | 5,500sti/min* | 4,000sti/min* | |
最大針距長度 | 5mm | 4mm | 5mm |
針桿行程 | 30.7mm | 29mm | 35mm |
壓腳提升量 | 手動:5.5mm 膝動:13mm |
手動:4mm 膝動:9mm |
手動:5.5mm 膝動:13mm |
機針 (出廠時) |
DB×1(#14) 適用於JE:134 (Nm75) |
DA×1(#9) 適用於JE:134 (Nm65) |
DB×1(#21) 適用於JE:134 (Nm130) |
旋梭 | 自動供油全迴轉旋梭 | ||
供油方式 | 自動 | ||
供油 | JUKI新型1號Defrix Oil(等同於ISO VG7) | ||
|
Guage | THROAT PLATE | FEED DOG | PRESSER FOOT ASM. | Specification | Sewing features | Remarks | Model | ||||
Figure | |||||||||||
Needle width |
P/N | Needle hole |
Number of grooves |
Thick | P/N | Pitch | P/N | ||||
B1109012A00 | 1.9 | 3 | 2.6 | B1613012A00 *B1613012A0B *B1613012B00 | 1.5 - 1.15 |
B1524012A0 *B1524012TA0 *B15245520A0 *D1524126WA0 *D1524555DA0 *11028156 | Light weight/ Medium weight | For general sewing | Throat plate (B1109012A0B) provides higher durability than throat plate (B1109012A00). Throat plate (B1109012A0F) has engraved marker lines and numbers vertically and horizontaly at intervals of 10mm. Throat plate (11028008) has engraved marker lines and numbersat intervals of 5mm. Throat plate (11001708) has grooves on the needle hole section and is effective to achieve well-tensed seam. Feed dog (B1613012A0B) has teeth made of urethane rubber and effectively prevents damages on the material. |
DDL-8700(-7) | |
B1109012A0B | 1.9 | 3 | 2.6 | ||||||||
B1109012A0F | 1.9 | 3 | 2.6 | ||||||||
11028008 | 1.9 | 3 | 2.6 | ||||||||
11001708 | 1.9 | 3 | 2.6 | ||||||||
B1109012A0C | 1.9 | 3 | 2.6 | B1613012A0C | 1.5 | Medium weight | Since the material ls securely clamped, puckering and uneven material feed are effectively prevened. | Use of sliding foot (B1524227AA0) prevents puckerihg and uneven material feed more effectively. | |||
B1109012A0N | 1.9 | 3 | 2.6 | B1613012A00 *B1613012A0B *B1613012B00 | 1.5 - 1.15 |
B1524555DAN | Suited to frictional faabrlcs. | Throat plate have been finished with nidax. | |||
B1109012B00 | 2.2 | 3 | 2.6 | B15240120A0 *1524012TA0 *B15245520A0 *D1524126WA0 *D1524555DA0 *11028156 | Medium weight/ Heavy weight | For sewhg heavy weight materials in general. | Throat plate (B1109012B0F) has engraved marker lines and numbers vertically and horizontaly at intervals of 10mm. | ||||
B1109012B0F | 2.2 | 3 | 2.6 | ||||||||
B1109012C00 | 1.9 | 4 | 2.6 | B1613012C00 | 1.5 | Medium weight | Suited to long-sized materials which need to be fed straight. | Throat plate (B1109012C0B) provides higher durability than throat plate (B1109012C00). Throat plate (B1109012C00) is used with regular types of sewing machine. Throat plate (B1109012C0B) is used with the sewing machine with a thread trimmer. Throat plate (B1109012C0F) has engraved marker lines and numbers vertically and horizontaly at intervals of 10mm. Throat plate (11001807) has grooves on the needle hole section and is effective to achieve well tensed seams. |
|||
B1109012C0B | 1.9 | 4 | 2.6 | ||||||||
B1109012C0F | 1.9 | 4 | 2.6 | ||||||||
11001807 | 1.9 | 4 | 2.6 | ||||||||
B1109012D00 | 1.9 | 4 | 2 | B1613012D00 | 1.15 | The feed dog has 4 teeth, but is suited to sewing sharp curves when compared with the other 4-teeth feed dogs. | |||||
B1109012E00 | 2.4 | 3 | 2.6 | B1613012A00 *B1613012B00 | 1.5 1.15 | Heaby weight | The needle hole on the throat plate has a recess, which is efective when sewing a material to be sewn with a higher thread tension. | Slightly increase the pressure of the presser foot. | |||
B1109012F00 | 1.6 | 3 | 2.6 | B1613012B00 *B1613012A00 | 1.15 1.5 | B15240120A0 *B1524012TA0 *B15245520A0 *D1524126WA0 *D1524555BA0 *D1524555DA0 *11028156 | Light weight | Efectively prevents stitch gathering at the overlapped section of a material. The 3-teeth feed dog, when compared with the 4-teeth feed dog, is suited to the sewhg of sharp curves. | Slightly lower the pressure of the presser foot. Throat plate (B1109012F0F) has engraved marker lines and numbers vertically and horizontaly at intervals of 10mm. |
DDL-8700(-7) DDL-8700A(-7) | |
B1109012F0F | 1.6 | 3 | 2.6 | ||||||||
B1109012G00 | 1.6 | 4 | 2 | B1613012D00 | 1.15 | The feed dog has 4 teeth, but is suited to sewing sharp curves when compared with the other 4-teeth feed dogs. | Slightly lower the pressure of the presser foot. The presser (pair)(D1524555BA0) has a short sole with flexible maneuvering performance and wide open, allowing easier extra thread in a relative manner. |
||||
B1109012i00 | 1.6 | 4 | 2 | B1613012i00 *B1613552000 | 1.15 | Suited to long-sized materials which need to be fed straight. Chain off thread is likely to be made. |
Slightly lower the pressure of the presser foot. A thin needle (#8 to #10) is sulted. Throat plate (B1109012l0F) has engraved marker lines and numbers vertically and holizontally at intervails of 10mm. Throat plate (B1109012l0B) provides higher durability than throat plate (B1109012l00). Throat piate (B1109012l00) is used with regular types of sewing machine. Throat plate (B1109012l0B) is used with the sewing machine with a thread trimmer. |
||||
B1109012i0B | 1.6 | 4 | 2 | ||||||||
B1109012i0F | 1.6 | 4 | 2 | ||||||||
B1109012T00 | 1.6 | 3 | 2.6 | B1613012T00 | 1.5 | B1524012TA0 *B15240120A0 *B15245520A0 *D1524126WA0 *D1524555BA0 *11028156 | Light weight | Suited to the material which is likely to cause stihch skipphg and puckering. (For tricot) Chain off thread is likely to be made. |
Slightly lower the pressure of the presser foot. A thin needle (#8 to #10) is sulted. Throat plate (B1109012T0B) provides higher durability than throat plate (B1109012T00). Throat piate (B1109012T00) is used with regular types of sewing machine. Throat plate (B1109012T0B) is used with the sewing machine with a thread trimmer. Throat plate (B11090121T0F) has engraved marker lines and numbers vertically and holizontally at intervails of 10mm. |
DDL-8700(-7) DDL-8700A(-7) | |
B1109012T0B | 1.6 | 3 | 2.6 | ||||||||
B1109012T0F | 1.6 | 3 | 2.6 | ||||||||
B1190543000 | 2.4 | 3 | 2 | B1621543000 | 1.8 | B15115430A0 *B1511543BA0 | Heaby weight | For sewing heavy-weight materials in general (Denirm and fabric for coats). | Slightly increase the pressure of the presser foot. | DDL-8700(-7) | |
B1109552000 | 1.8 | 4 | 2.05 | B16135552000 *B1613012i00 *B1614552A00 | 1.15 | B15240120A0 *B1524012TA0 *B15245520A0 *D1524126WA0 *D1524555DA0 *11028156 | Light weight/ Medium weight | Throat plate has engraved marker lines and numbers at intervals of 1/4. | |||
B1109555000 | 1.8*2.7 | 4 | 2.6 | B1613555A00 *B1613555B00 | 2 1.2 |
Medium weight/ Heavy weight | Suited to long-sized materials which need to be fed straight. | ||||
B1109555C00 | 1.6 | 4 | 2 | B1613555C00 | 1.2 | Light weight | Suited to long-sized materials which need to be fed straight. | ||||
B1109555D00 | 1.8*2.5 | 4 | 2.6 | B1613555D00 | 1.5 | Heaby weight | Suited to long-sized materials which need to be fed straight. | Slightly increase the pressure of the presser foot. | |||
B1109555G00 | 1.6 | 6 | 2 | B1613555G00 | 1.15 | B15240120A0 *B1524012TA0 *B15245520A0 *D1524126WA0 *D1524555DA0 *D1524555DAC *11028156 | Medium weight | Ahigher efficiency of feed is obtained. The material is fed straight. | Please use a stitching pitch at 3mm or less. Presser foot (asm.)(D1524555DBC) has a wider sole, which means it provides a still higher effciency of feed. |
||
B1109555J00 | 2.4 | 6 | 2.3 | B1613555J00 | 1.5 | Medium weight/ Heavy weight | Presser foot (asm.)(D1524555DBC) has a wider sole, which means it provides a still higher effciency of feed. | ||||
B1109555H0B | 2.6 | 3 | 2.6 | B1613555H00 | 1.8 | B1511543BA0 *B15115430A0 | Heavy weight | For sewhg heavy-weight materials in general. | Slightly increase the pressure of the presser foot. *Throat plate (11074101) has marker lines and numbers on it at a 5mm interval. |
DDL-8700H(-7)
|
|
11074101 | 2.6 | 3 | 2.6 | ||||||||
B1109555i0N | 1.6 | 4 | 2 | B1613012i00 | 1.15 | B1524555DAN | Suited to the sewig of frictional materials. | Throat plate and presser foot (asm.) have been finished with nidax. | DDL-8700(-7) DDL-8700A(-7) | ||
B1109555R00 | 1.3 | 3 | 2.6 | B1613555R00 | 1.15 | D1524555DA0 *D1524155WA0 *D1524555BA0 | For sewing light-weight materials in general. | Presser (pair)(D1524155WA0) has a narrower needle groove width at 1mm. A thin needle (#8 to #11) is suited. |
|||
D1109126W00 | 1.2 | 3 | 2.6 | B1613012B00 *B1613012A00 *B1613012A0B | 1.15 1.5 - |
D1524126WA0 *B15240120A0 *B1524012TA0 *B15245520A0 *D1524155WA0 *D1524555DA0 | Light weight | Suited to the sewig of frictional materials. | Slightly lower the pressure of the presser foot. A thin needle (#8 to #10) is sulted. Throat plate (B11090126W0F) has engraved marker lines and numbers vertically and holizontally at intervails of 10mm. Shce the feed dog (D1613155W0D) has long teeth, the material can be fed straight. It is used with the stitch length set to 2mm or less. |
||
D1109126W0F | 1.2 | 3 | 2.6 | For sewing light-weight materials in general. | |||||||
D1109155W00 | 1.3 | 4 | 2 | D1613155W00 *D1613155W0D | 1.15 | Suited to the material which is likely to cause stihch skipphg and puckering. Since the needle hole of the throat plate has grooves, well-tensed seams are promised. |
|||||
D1109155W0F | 1.3 | 4 | 2 | Suited to the sewing of extra light weight materials and synthetic fabrics using synthetic thread. Since the needle hole of the throat plate has grooves, well-tensed seams are promised. |
|||||||
D1109555D0i | 1.6 | 4 | 2 | B1613012i00 | 1.15 | D1524555DA0 *B15240120A0 *B1524012TA0 *B15245520A0 *D1524126WA0 | Light weight | Suited to the material which is likely to cause stihch skipphg and puckering. Throat plate (B11090121D0F) has engraved marker lines and numbers vertically and holizontally at intervails of 10mm. Throat plate (11074002) has engraved marker lines and numbersat intervails of 5mm. |
Slightly lower the pressure of the presser foot. A thin needle (#8 to #10) is sulted. |
DDL-8700(-7) DDL-8700A(-7) | |
D110955D0F | 1.6 | 4 | 2 | ||||||||
11074002 | 1.6 | 4 | 2 | ||||||||
D1190555D0W | 1.3 | 4 | 2 | D1613155W00 | 1.15 |